Advanced Barrel Systems, Inc. products are a meld of aerospace thermal management and old world barrel technology. Our barrels excel in the arctic or the desert, on the battlefield or in a hot prairie dog town. Our patented (U.S. #6,889,464) composite technology is proven on diverse applications. Whether your requirements are for M4, M-16, AR-10, SR-25 or other autoloader platforms or bolt action barrels from 17 Ackley Hornet to the 50 BMG, we can supply your needs.

December 10, 2008   -- New Staff Added

New ordering policy

We are totally at the lead time mercy of the barrel makers. If a barrel blank is not in stock at our shop, you must order the blank from the list of barrel makers. Our service will be confined to custom wrapping your blank unless we have your specified caliber, twist and length blank in stock when you call. 

Customers must purchase blanks from the following list of vendors that are already machined to our prints. 

Satern Custom Machining Very accurate 5R rifled blanks. 712-362-4991 Any Alexander Arms chamberings for the 6.5 Grendel or Beowulf need to be ordered from Satern and drop shipped here for the carbon process.

Classic Barrel and Gunworks 4 and 6 groove blanks. 928-772-4060 Danny Pedersen usually has a few gun drilled blanks on hand for our wrapping profile. Often a lead time of less than 30 days. 

Rock Creek Barrels, Inc. 5R profile barrels. 608-862-2357 ask for Paul

Lawton Rifle Barrels Nice cut rifled blanks. Our best choice for any .408 blank. 406-683-2388. Ask for Bill.

Check out our new ready to ship in-stock barrels page HERE.

Other odds and ends for sale land on this page too.

We are pleased to introduce a new premium custom builder. 

KK Jense at Jense Precision is building some of the finest premium custom rifles we have ever seen.

We are pleased to add him to the list of approved and highly recommended builders. We are confident his end product and customer service will make your next build a no hassle process. 

ABS Introduces another Premium Builder.

MPI Rifles is a new but highly recommended builder in Dillon, Montana. Their roots are in building sniper and military grade rifles for our troops in the field whose lives depend on them and this same workmanship and precision goes into all MPI Rifles - without fail and without exception. Their strict adherence to these standards is what makes each of the MPI Rifles so inherently accurate, and with match grade or premium factory ammunition guaranteed to shoot consistent one-half (0.5 MOA) minute of angle or better. Guaranteed. Call Mike McIntyre at 406-683-6800. 

Product Profile

We recognize that heat management is a critical element of building a better barrel. Carbon composite barrels built with ordinary fiber grades have a reputation of insulating heat. We use a patented method of applying a remarkable thermally conductive matrix that conducts heat 372% faster than steel. This technology has made our barrels thrive in the high volume world of gas operated semi and full auto firearms. 

Many old technology composite barrels rely on tensioning a composite sleeve over a tiny barrel liner. There are flaws in this approach. When steel is heated, it expands; carbon shrinks when heated. Any heat changes the amount of tension in the barrel and as a result the harmonics change too.  Our patented method of tuning the barrels by manipulating the helix angle of the fiber placement isn't heat sensitive.  We offer benchrest accuracy with sporter weight.

We don't sacrifice safety for anything. We start with top quality lightweight barrels and enhance their performance with carbon. Our barrels can be safely fired without the carbon applied. The composite matrix is tough, durable and uses a patented  crack propagation limiting technique that is extraordinarily tough. This composite is not fragile like your fly rod or golf club shaft. 

carbon fiber rifle barrels composite m24 ar-15 ar15 m16 m-16 

Contact Information

Phones are very busy here and I encourage you to use email if you are not able to get through immediately on the phone. 

Telephone

402-890-2709 

FAX

402-466-5685

Postal address

 

FFL Shipping address is:

ABS, Inc., 3120 North 33rd Street, Suite 1, Lincoln, NE 68504

Electronic mail

 absbarrels(nospam)@gmail.com
Please remove the (nospam) characters before sending.

 

Links

MPI Rifles

Rock Creek Barrels, Inc.

Bettin Custom Guns, Premium Custom Rifles 

Accurate Innovations - Rifle Stocks to die for

Lonewolf Stocks - Lightest stocks on the market

Neco - Distributor of Quickload software

Varmint Hunter's Association

Mic McPherson's Site. Cool stuff and a wealth of information

Copyright © 2004 Advanced Barrel Systems, Inc.